Women’s Three Piece Pajama Set

DIG premium polyethylene drip tubing is designed to meet all installation requirements for drip irrigation or low-volume irrigation systems for commercial, agriculture and residential applications. Our 1/2″ polyethylene drip tubing is available with .630″ OD, .670″ OD, .700″ OD and .710″ OD and in 100, 200, 500 and 1000 coils. Made of low-density polyethylene resin with a minimum of 2% carbon black, the polyethylene tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength.

Features

• Contains antioxidant to protect the drip tubing from thermal degradation with a minimum of 2% concentrated carbon black resin added
• The polyethylene drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength
• Contains Dow 7510 premium resins
• Use with our wide range of compression and barbed fittings
• Available in black or brown colors
• Coil length in 100, 250′, 500′ and 1000′ (30 m, 75 m, 150 m, and 300 m)

Specifications

• Operating pressure: up to 60 PSI (4.2 BAR)
• Material: Dow FINGERPRINT premium grade, DFDA-7510 NT linear low-density polyethylene resin with a minimum of 2% carbon black
• Available with four dimensions:
  • .520″ ID x .620″ OD (13.2 mm x 15.7 mm) wall thickness: .050″ (1.3 mm)
  • .570″ ID x .670″ OD (14.5 mm x 17.0 mm) wall thickness: .050″ (1.3 mm)
  • .600″ ID x .700″ OD (15.2 mm x 17.8 mm) wall thickness: .050″ ( 1.3 mm)
  • .620″ ID x .710″ OD (15.6 mm x 18.0 mm) wall thickness: .045″ (1.1 mm)